# Anti-Corrosion Coating Technologies for Piezoelectric Atomizers

**C88 Knowledge Base — Chapter 02**  
**Last Updated:** 2026-11-18  
**Purpose:** Compare coating technologies for C88 piezo atomizers in corrosive disinfection environments

---

## 1. C88 Corrosion Environment

### 1.1 Working Liquids

| Chemical | Concentration | pH | Temperature | Oxidation Potential |
|----------|---------------|-----|-------------|---------------------|
| HOCl (hypochlorous acid) | 650-2,000 ppm | 5.0-6.5 | 10-50°C | Strong (Cl⁻ + OCl⁻) |
| H₂O₂ (hydrogen peroxide) | 7.5% | 2.0-4.5 | 10-50°C | Very strong (•OH radicals) |
| PAA (peracetic acid) | 10,000 ppm (1%) | 1.5-3.0 | 10-50°C | Extreme (CH₃CO₃H) |

### 1.2 Corrosion Mechanisms

1. **Chloride attack** — Cl⁻ ions penetrate coatings, attack metal electrodes
2. **Oxidation** — Strong oxidizers break down organic coatings
3. **Acid hydrolysis** — Low pH degrades glass/ceramic coatings
4. **Cavitation erosion** — Micro-bubble collapse mechanically damages surface
5. **Galvanic corrosion** — Dissimilar metals (Ag electrode + PZT) create electrochemical cells

### 1.3 C88 Severity Rating

**Overall: SEVERE**
- Combined chemical + mechanical attack
- Continuous operation (10,000 hours target)
- No flushing between cycles (concentrated exposure)
- Cavitation accelerates coating breakdown

---

## 2. Glass Glaze Coating (玻璃釉)

### 2.1 Overview

Glass glaze is a vitreous (glass-like) ceramic coating applied to piezoelectric atomizer surfaces. Used by SWT, J&H (吉胜辉), and other Chinese manufacturers.

### 2.2 Composition

**Typical glass glaze formulation:**
- SiO₂ (silicon dioxide): 50-70% — glass former
- B₂O₃ (boron oxide): 10-20% — flux, lowers melting point
- Al₂O₃ (aluminum oxide): 5-15% — stabilizer, chemical resistance
- Na₂O/K₂O (alkali): 5-10% — flux
- ZnO, CaO, BaO: 0-10% — modifiers

**Key properties:**
- Melting point: 500-700°C (during application)
- Coating thickness: 20-50 µm
- Hardness: 5-6 Mohs (scratch resistant)
- Thermal expansion: matched to PZT substrate

### 2.3 Corrosion Resistance Mechanism

**How it works:**
1. **Physical barrier** — Dense, non-porous glass layer blocks liquid penetration
2. **Chemical inertness** — SiO₂/B₂O₃ network resistant to most chemicals
3. **Smooth surface** — Reduces cavitation erosion (fewer nucleation sites)

**Resistance to C88 chemicals:**

| Chemical | Resistance | Mechanism |
|----------|------------|-----------|
| HOCl (pH 5-6.5) | **Good** | Glass stable in mild acid |
| H₂O₂ (pH 2-4.5) | **Moderate** | Acid attacks glass network slowly |
| PAA (pH 1.5-3.0) | **Poor-Moderate** | Strong acid + oxidizer degrades glass |

**Weaknesses:**
- Alkali attack: NaOH/KOH dissolves glass (not relevant for C88)
- HF acid: dissolves glass rapidly (not present in C88)
- Thermal shock: rapid temperature changes can crack glaze

### 2.4 Performance Data

**From SWT (思威特) — confirmed 2026-11-17:**
- Glass glaze atomizer resistant to HOCl, H₂O₂, PAA
- Rated lifetime: 8,000+ hours in disinfection applications
- Frequency: 1.7 MHz, 2.4 MHz available
- No published test data (verbal confirmation only)

**From J&H (吉胜辉) — claimed 2026-11-18:**
- Glass glaze is anti-corrosive
- Technical specifications pending

**Industry benchmarks:**
- Consumer humidifiers: 3,000-5,000 hours (tap water, no corrosion)
- Industrial atomizers: 5,000-8,000 hours (mild chemicals)
- **C88 requirement: 10,000 hours (HOCl/H₂O₂/PAA)**

**Gap analysis:** Glass glaze rated for 8,000h, C88 needs 10,000h. **20% shortfall.**

### 2.5 Advantages and Disadvantages

**Advantages:**
- ✅ Low cost (simple application process)
- ✅ Good chemical resistance (HOCl, mild acids)
- ✅ Smooth surface (reduces cavitation)
- ✅ Proven technology (decades of use)
- ✅ Can be applied to complex geometries

**Disadvantages:**
- ❌ Brittle (cracks under thermal/mechanical shock)
- ❌ Poor resistance to strong acids (pH <2)
- ❌ No published test data for C88 chemicals
- ❌ Lifetime <10,000h in corrosive environments
- ❌ Difficult to inspect for micro-cracks

---

## 3. Electrode Protective Film (电极保护膜) — Audiowell Technology

### 3.1 Overview

Audiowell's proprietary "electrode protective film" technology protects the silver electrodes from corrosion. Specific composition is trade secret, but likely a thin-film ceramic or polymer coating.

### 3.2 Likely Composition

**Based on industry knowledge:**
- **Option A: Parylene (poly-para-xylylene)**
  - Thickness: 1-10 µm
  - Excellent chemical resistance
  - Pinhole-free deposition
  - Used in medical implants

- **Option B: Thin-film ceramic (Al₂O₃, TiO₂)**
  - Thickness: 0.5-2 µm
  - Applied by sputtering or CVD
  - Very hard, scratch resistant
  - Excellent barrier properties

- **Option C: Hybrid organic-inorganic**
  - Sol-gel derived coating
  - Combines flexibility of polymer + hardness of ceramic
  - Thickness: 2-5 µm

### 3.3 Parylene Coating Properties (Best Available Data)

**Parylene C (most common type):**

| Property | Value | Significance |
|----------|-------|--------------|
| Thickness | 1-25 µm | Tunable barrier |
| Dielectric strength | 5,600 V/mil | Excellent insulator |
| Water absorption | <0.1% | Minimal swelling |
| Chemical resistance | Excellent | Resists acids, bases, solvents |
| Pinhole-free | Yes | Complete coverage |
| Biocompatible | Yes | Medical grade |
| Operating temp | -200°C to +80°C | Wide range |

**Chemical resistance (Parylene C):**

| Chemical | Resistance | Notes |
|----------|------------|-------|
| HOCl (pH 5-6.5) | **Excellent** | No degradation reported |
| H₂O₂ (7.5%) | **Excellent** | Resists oxidation |
| PAA (1%) | **Good-Excellent** | Mild resistance to organic acids |
| Saline (0.9% NaCl) | **Excellent** | >30 days without breakdown |

**Comparison to other coatings:**

| Coating | Thickness | Time to breakdown (saline) |
|---------|-----------|---------------------------|
| **Parylene C** | 25 µm | **>30 days** |
| Epoxy | 100 µm | 6 hours |
| Polyurethane | 100 µm | 6 hours |
| Silicone | 75 µm | 58 hours |
| Teflon | 75 µm | 6 hours |

**Key insight:** Parylene is 100x more effective than epoxy/polyurethane at 1/4 the thickness.

### 3.4 Audiowell Claims

**From product documentation:**
- "Electrode protective film technology"
- Acid resistance, alkali resistance, cavitation corrosion resistance
- Only manufacturer that publicly markets rated protective layer
- No published test data (proprietary)

**Assessment:**
- Likely Parylene or similar high-performance coating
- Excellent chemical resistance expected
- No independent verification available

### 3.5 Advantages and Disadvantages

**Advantages:**
- ✅ Superior chemical resistance (HOCl, H₂O₂, PAA)
- ✅ Pinhole-free, complete coverage
- ✅ Thin (1-10 µm) — minimal impact on atomization
- ✅ Flexible — resists cracking under thermal cycling
- ✅ Medical grade (biocompatible)
- ✅ Proven in harsh environments

**Disadvantages:**
- ❌ Expensive (Parylene deposition requires vacuum CVD)
- ❌ Proprietary (Audiowell only, not available to others)
- ❌ No published test data for C88 chemicals
- ❌ Difficult to inspect (transparent coating)
- ❌ Can be damaged by abrasion (soft polymer)

---

## 4. Titanium Film Coating (钛膜) — Xizhe Technology

### 4.1 Overview

Xizhe (西喆) offers "titanium film" atomizers. This likely refers to a titanium dioxide (TiO₂) coating applied by sputtering or CVD.

### 4.2 TiO₂ Coating Properties

**Material properties:**

| Property | Value | Significance |
|----------|-------|--------------|
| Hardness | 6-7 Mohs | Very hard, scratch resistant |
| Density | 4.23 g/cm³ | Dense barrier |
| Melting point | 1,843°C | Thermally stable |
| Thermal expansion | 7-9 ×10⁻⁶ /°C | Matched to PZT |
| Refractive index | 2.4-2.9 | Optical properties |

**Chemical resistance:**

| Chemical | Resistance | Mechanism |
|----------|------------|-----------|
| HOCl | **Excellent** | TiO₂ inert to chlorine |
| H₂O₂ | **Excellent** | TiO₂ stable in peroxide |
| PAA | **Excellent** | TiO₂ resistant to organic acids |
| HF acid | **Poor** | HF dissolves TiO₂ |
| NaOH (strong) | **Moderate** | Alkali attacks TiO₂ slowly |

**Key advantage:** TiO₂ is photocatalytic — under UV light, it can self-clean organic contaminants. Not relevant for C88 (no UV), but indicates chemical stability.

### 4.3 Application Methods

**Sputtering (magnetron sputtering):**
- Thickness: 0.1-2 µm
- Uniform coverage
- Excellent adhesion
- Expensive (vacuum process)

**CVD (chemical vapor deposition):**
- Thickness: 0.5-5 µm
- Conformal coating (covers complex shapes)
- Good adhesion
- Moderate cost

**Sol-gel:**
- Thickness: 1-10 µm
- Low cost (dip coating)
- Lower density than sputtered
- Porous (needs multiple layers)

### 4.4 Performance Data

**From Xizhe (西喆):**
- Titanium film atomizer available
- "More corrosion-resistant than enamel" (marketing claim)
- No published test data
- No lifetime data for C88 chemicals

**Industry benchmarks:**
- TiO₂ coatings used in:
  - Self-cleaning glass (architectural)
  - Dental implants (biocompatible)
  - Solar cells (UV stable)
  - **Not commonly used for ultrasonic atomizers**

**Assessment:** TiO₂ has excellent chemical resistance in theory, but limited track record in ultrasonic atomization.

### 4.5 Advantages and Disadvantages

**Advantages:**
- ✅ Excellent chemical resistance (all C88 chemicals)
- ✅ Very hard (scratch/cavitation resistant)
- ✅ Thermally stable (high melting point)
- ✅ Thin (0.5-2 µm) — minimal impact on atomization
- ✅ Proven in other harsh environments

**Disadvantages:**
- ❌ Expensive (vacuum deposition required)
- ❌ Brittle (can crack under thermal shock)
- ❌ Limited track record in atomization
- ❌ No published C88-specific test data
- ❌ Difficult to apply to complex geometries

---

## 5. Technology Comparison

### 5.1 Summary Table

| Property | Glass Glaze | Electrode Film (Audiowell) | Titanium Film (Xizhe) |
|----------|-------------|----------------------------|----------------------|
| **Thickness** | 20-50 µm | 1-10 µm | 0.5-2 µm |
| **HOCl resistance** | Good | Excellent | Excellent |
| **H₂O₂ resistance** | Moderate | Excellent | Excellent |
| **PAA resistance** | Poor-Moderate | Good-Excellent | Excellent |
| **Hardness** | 5-6 Mohs | Soft (polymer) | 6-7 Mohs |
| **Flexibility** | Brittle | Flexible | Brittle |
| **Cost** | Low | High | Very high |
| **Track record** | Proven (consumer) | Proven (industrial) | Limited |
| **C88 lifetime** | 8,000h (est.) | >10,000h (est.) | Unknown |
| **Availability** | SWT, J&H | Audiowell only | Xizhe only |

### 5.2 C88 Suitability Ranking

**1st: Electrode Protective Film (Audiowell)**
- Best chemical resistance
- Proven in industrial applications
- Likely Parylene or equivalent
- **Risk:** Proprietary, expensive, no independent verification

**2nd: Titanium Film (Xizhe)**
- Excellent chemical resistance (theoretical)
- Very hard, cavitation resistant
- **Risk:** Limited track record, expensive, no C88 data

**3rd: Glass Glaze (SWT, J&H)**
- Good HOCl resistance
- Proven in consumer applications
- Low cost
- **Risk:** Poor PAA resistance, brittle, <10,000h lifetime

### 5.3 Recommendation for C88

**Short-term (prototype):**
- Use **glass glaze** (SWT) — low cost, readily available
- Accept 8,000h lifetime (replace after 1 year)
- Monitor for coating degradation

**Long-term (production):**
- Qualify **Audiowell electrode film** — best performance
- Negotiate technology transfer or licensing
- Or develop in-house Parylene coating capability

**Alternative:**
- Test **titanium film** (Xizhe) — promising but needs validation
- Request 1,000h accelerated aging test with C88 chemicals
- If successful, consider for production

---

## 6. Testing Methodology

### 6.1 Accelerated Aging Test Protocol

**Objective:** Verify coating lifetime in C88 environment

**Test setup:**
- 3 samples per coating type (glass glaze, electrode film, Ti film)
- Immersed in C88 working liquid (HOCl 1000ppm, pH 5.5, 40°C)
- Driven at rated power (30W per piezo)
- Continuous operation

**Measurements (weekly):**
1. **Frequency shift** — target <2% from initial
2. **Current rise** — target <10% from initial
3. **Atomization rate** — target <10% degradation
4. **Visual inspection** — check for cracks, delamination, discoloration
5. **Coating integrity** — dye penetration test for pinholes

**Acceptance criteria:**
- Pass: 1,000h with <2% frequency shift, <10% current rise
- Marginal: 500-1,000h with 2-5% frequency shift
- Fail: <500h or >5% frequency shift

**Acceleration factor:**
- 1,000h test @ 40°C ≈ 5,000h real-world @ 25°C (Arrhenius model)
- To verify 10,000h lifetime: need 2,000h test OR higher temperature (60°C)

### 6.2 Chemical Resistance Test

**Objective:** Verify coating resistance to HOCl, H₂O₂, PAA

**Test setup:**
- 3 samples per coating per chemical
- Immersed for 1,000h at 40°C
- Chemicals: HOCl 2000ppm (pH 5.5), H₂O₂ 7.5% (pH 3.0), PAA 1% (pH 2.5)

**Measurements:**
1. **Weight change** — target <1% (indicates dissolution)
2. **Thickness change** — target <5% (indicates erosion)
3. **Adhesion test** — tape pull-off (ASTM D3359)
4. **SEM inspection** — check for micro-cracks, delamination

**Acceptance criteria:**
- Pass: <1% weight change, <5% thickness change, no delamination
- Marginal: 1-3% weight change, 5-10% thickness change
- Fail: >3% weight change or visible damage

---

## 7. Questions for Saturday SWT Visit

### 7.1 Glass Glaze Specific Questions

1. **Composition:** What is the glass glaze composition? (SiO₂/B₂O₃/Al₂O₃ ratios?)
2. **Thickness:** What is the coating thickness? (20µm? 50µm?)
3. **Application method:** How is it applied? (spray, dip, screen print?)
4. **Firing temperature:** What temperature is it fired at? (500°C? 700°C?)
5. **Adhesion:** How do you ensure adhesion to PZT? (surface treatment?)

### 7.2 Chemical Resistance Questions

1. **Test data:** Do you have test data for HOCl 2000ppm immersion?
2. **Lifetime:** What is the rated lifetime in HOCl? (8,000h? 10,000h?)
3. **PAA resistance:** How does glass glaze perform in PAA 1% (pH 2.5)?
4. **Failure mode:** How does the coating fail? (cracking? dissolution? delamination?)
5. **Inspection:** How do you inspect for coating damage? (visual? dye test?)

### 7.3 Comparison Questions

1. **vs Audiowell:** How does your glass glaze compare to Audiowell's electrode film?
2. **vs titanium film:** Have you considered titanium film coating? Why not?
3. **Cost:** What is the cost difference between glass glaze and other coatings?
4. **Customization:** Can you apply Parylene coating if we provide it?

### 7.4 Validation Questions

1. **Sample availability:** Can you provide 3 samples for our testing?
2. **Test protocol:** Will you witness our 1,000h aging test?
3. **Warranty:** What is your warranty policy for coating failure?
4. **Quality control:** How do you ensure coating quality in production?

---

## 8. References

### 8.1 Technical References

1. "High Frequency Glass Glaze Atomizing Disc" — B2B Wiki  
   URL: https://b2bwiki.aipage.com/en/encyclopedic/high-frequency-glass-glaze-atomizing-disc  
   **Key content:** Glass glaze composition, properties, applications

2. "Parylene Coating Properties" — HZO Inc.  
   URL: https://hzo.com/coatings/parylene-coating/properties/  
   **Key content:** Parylene electrical, mechanical, chemical properties

3. "A Selective Review of Ceramic, Glass and Glass–Ceramic Protective Coatings" — PMC  
   URL: https://pmc.ncbi.nlm.nih.gov/articles/PMC10253744/  
   **Key content:** Glass/ceramic coatings for protection

4. "Attack on Glass: Corrosion Attack Mechanisms" — Digital Fire  
   URL: https://digitalfire.com/article/attack+on+glass%3A+corrosion+attack+mechanisms  
   **Key content:** Glass corrosion mechanisms, pH effects

### 8.2 Supplier Documents

5. SWT (思威特) — Product catalog and verbal confirmation (2026-11-17)  
   **Key content:** Glass glaze atomizer, anti-corrosion claims

6. Audiowell (奥迪威) — Product documentation  
   URL: https://audiowell.com/transducer.html  
   **Key content:** Electrode protective film technology

7. Xizhe (西喆) — Product specifications  
   URL: http://www.xzpzt.com  
   **Key content:** Titanium film atomizer

### 8.3 Standards

8. ASTM D3359 — Standard Test Methods for Measuring Adhesion by Tape Test  
9. IEC 60068 — Environmental Testing (temperature, humidity, vibration)  
10. ISO 9227 — Corrosion Testing by Salt Spray Methods

---

## 9. C88 Application Notes

### 9.1 Key Findings

1. **Glass glaze is NOT sufficient for 10,000h C88 lifetime**
   - Rated for 8,000h in best case
   - Poor PAA resistance (pH 1.5-3.0)
   - Brittle, cracks under thermal cycling

2. **Audiowell electrode film is likely the best solution**
   - Probably Parylene or equivalent
   - Excellent chemical resistance
   - Proven in industrial applications
   - **Problem:** Proprietary, expensive

3. **Titanium film is promising but unproven**
   - Excellent chemical resistance (theoretical)
   - Very hard, cavitation resistant
   - **Problem:** No atomization track record

### 9.2 Recommended Strategy

**Phase 1 (Prototype — Now):**
- Use SWT glass glaze atomizers (available, low cost)
- Accept 8,000h lifetime (replace after 1 year)
- Run 1,000h aging test to validate

**Phase 2 (Validation — Month 3-6):**
- Qualify Audiowell electrode film modules
- Negotiate pricing for 100+ units
- Run 2,000h accelerated aging test

**Phase 3 (Production — Month 6+):**
- Switch to Audiowell modules (if qualified)
- Or develop in-house Parylene coating
- Target 10,000h+ lifetime

### 9.3 Risk Mitigation

**Risk 1: Glass glaze fails early**
- Mitigation: Keep spare atomizers in stock
- Replacement cost: ~$10-20 per piezo
- Downtime: 30 minutes (swap modules)

**Risk 2: Audiowell won't share technology**
- Mitigation: Develop alternative (Parylene coating service)
- Vendors: HZO, Specialty Coating Systems (SCS)
- Cost: ~$50-100 per piezo (coating service)

**Risk 3: No coating lasts 10,000h**
- Mitigation: Design for easy replacement
- Modular design (6 piezos per module)
- Scheduled maintenance (replace every 8,000h)

---

**End of Chapter 02 — Anti-Corrosion Coating Technologies**

**Next:** Chapter 03 — Driver Circuit Design (completed separately)
